tubular element

Tubular electric heating element is in metal tube placed in the middle Fe Cr Al or spiral nickel chromium wire as the heating body, and in the tube filling dense good insulation thermal conductivity and electric melting crystalline magnesium oxide powder, with both ends of the sealing materials, sealing, and leads to the threaded rod ends of the resistance wire leads for connecting the power supply line with.

1.JGQ type tubular electric heating element

The JGQ tubular electric heating element is used for blowing hot air in the blowing pipe of the air heating system, and also can be used as an electric heating element of various ovens, electric furnace and paint drying and air heating. Tube material is generally 10 steel, the maximum operating temperature of 300℃.

tubular element

2.JGY type tubular electric heating element

JGY type tubular electric heating element for heating oil in open or closed oil tank. JGY2, JGY3 type maximum operating temperature of 300 degrees Celsius, while the JGY4 type used for heating the flow or circulation of oil, the maximum operating temperature of 100 degrees celsius. JGY2, JGY4 type is the tubular bending welding on flanges, element diameter is phi 12mm. JGY3 type U tube, the diameter of phi l2mm. Pipe material for No. 10 steel.

3.JGX type tubular electric heating element

JGX tubular heating elements are used in nitrate solution is heated, the pipe material is lCrl8Ni9Ti maximum working temperature of 550 ℃.

4.JGW type tubular electric heating element
Jgw tubular electrothermal element is a far infrared radiation paint is coated on the outside of the pipe, the heating can radiate far infrared wave for heating and drying paint, plastics, and other organic compounds and polymer material and water containing other substances, and is suitable for installation in the tunnel drying or drying room, the maximum operating temperature to 300 ℃.