Keywords：aging furnace,hardening furnace,aluminum,aluminum alloy aging

vertical aluminum aging furnace

Aluminum aging furnace, aluminum aging furnace vertical, vertical aluminum aging furnace for aluminum alloy hardening (solid solution processing), its structure has a hot air circulation passage, and take two-zone temperature control, so that temperature uniformity expanded unit thermal efficiency. Quench tank to the furnace just below, so as to shorten the transfer quenching time, improve the quality of work hardening. Workpiece material out of the door frame and the door opening and closing are electronically controlled, easy to operate. Rooms are equipped with interlock operation, safe and reliable. Available Light alloy and aluminum billet, pipe, bar, plate, sheet, vehicle wheels, homogenized aluminum cylinder heads and other artifacts, etc., heating, and other solid solution heat treatment.

Aluminum aging furnace shell, lining, circulating fan, wind deflector, heating systems, baskets lifting mechanism, door, electrical control composed.

Aluminum alloy aging furnace shell with welded steel for frames. Inner and outer walls are made of high-quality cold-rolled steel production, thermal deformation coefficient is small, lined with aluminosilicate refractory fiber blanket acupuncture for insulation and insulation materials, reduce the temperature rise of the furnace wall.

Loading the car with the hardening furnace common.

Door casing is also used as a frame of steel weld, the outer wall also produced cold rolled steel, also lined with needle blanket aluminosilicate refractory fibers for insulation and insulation materials.

Mouth around the embedded rubber asbestos packing, after the door shut and mouth snapping rubber asbestos packing, to ensure that no heat dissipation.

Aluminum aging furnace heating elements tubular heaters, are arranged on both sides of the furnace and trolley surface 0Cr25Al5 resistance wire made of high resistance alloy wire, the outer tube titanium tube production, and long service life. In order to ensure uniformity of furnace temperature, electric fan means and provided ventilation system. Ventilator device is mounted to the top of the furnace, the fan used 1Cr18Ni9Ti heat-resistant steel production, centrifugal. Ventilation system by a wind deflector and plates. Deflector mounted on top of the furnace, there are guide duct. After turning on the fan, the wind from the fan thrown through the guide duct evenly blown on both sides of the heater chamber, through the lower part of the windshield blown furnace vent, and then guide the lower portion of the fan air suction fan inside, then thrown ......, and so forth cycle, the heat generated by the heater into the furnace, the workpiece is heated evenly.

Vertical aluminum aging hardening furnace technology parameters:

parameter name		Unit	Model
parameter name		Unit	RCL-45-6	RCL-50-6	RCL-55-6	RCL-60-6	RCL-70-6	RCL-85-6
Rated Power		KW	45	50	55	60	70	85
Rated Voltage		V	3Phase/380V	3Phase/380V	3Phase/380V	3Phase/380V	3Phase/380V	3Phase/380V
Highest temperature		℃	650	650	650	650	650	650
Operating temperature		℃	650	650	650	650	650	650
Number of district heating		Area	1	2	2	2	2	2
Work size	Long	mm	1200	1500	1800	2000	2000	2200/2000
	Width	mm	600	600	800	800	800	1000
	High	mm	1200	1600	1000	1200	1600	1350
Air furnace heating time		h	≤1.5	≤1.5	≤1.5	≤1.5	≤1.5	≤1.5
Element connection		Y	YY	YY	YY	YY	YY	YY
Air furnace power loss		KW	≤4	≤4	≤5.5	≤5.5	≤6	≤6
Temperature control accuracy		℃	±1	±1	±1	±1	±1	±1
Temperature uniformity		℃	±5	±5	±5	±5	±5	±5
Dimensions	Diameter	mm	～1400	～1400	～1400	～1400	～1400	～1400
Dimensions	Depth	mm	～1950	～1950	～1950	～1950	～1950	～1950
The maximum loading capacity		Kg	300	400	500	600	800	900
Complete Weight		Kg	6.0T	6.5T	6.8T	7.5T	8.0T	8.0T